industrial repair agent > wear resistant rubber epoxy resin adhesive repair agent

wear resistant rubber epoxy resin adhesive repair agent

BD916 wear resistant rubber epoxy resin adhesive compound repair agent

Performance features of BD916 rubber wear resistant repair agent epoxy resin compound adhesives:
This product is solvent-free type polyether adhesive,the curing speed is fast,with a good adhesion and high strength,
wear resistant,good filling-ability,avirulent insipidity,medium resistant,aging resistant,easy to operate.

Main usage of BD916 wear abrasion resistant rubber epoxy adhesive compound repair agent:
Used in the joint repairing of steel core,the whole core and common conveyor belt horizontal and vertical tear,
and repairing of the conveyor belt surface wear, impellers, belt edge wear,belt surface perforation and joint sealing,
the repairing of polyurethane composite tube,cable,rubber roller and other rubber products.

How to use:
1.Surface treatment: Matting on the pending-repair area with steel brush,cleaning,decontamination,
degreasing and drying it by airing(we should scrub the pending-repair areas repeatedly with acetone,
ethyl acetate and so on for degreasing and cleaning,only in this way,it can achieve the good adhesive strength)

2.Configure adhesive and repair: According to the mass ratio A:B=2:1,you should stir it uniformly quickly in a dry and
clean utensil(be sure not to have water and water vapor),then pour it into the pending-repair area for floating,
curing for 4～6 hours at the normal temperature before putting it into use,curing for 48 hours can reach to
the largest strength.

Technical index:

Appearance	Adhesive force	Tensile strength	Shore A hardness
black viscous liquid	≥100N/2.5cm	≥2MPa	65±10

Notes:
1.This product should control within 6-8 minutes from mixing to using up.

2.If the temperature is too low,can bake the pending- repair area with iodine tungsten lamp in advance to improve
the temperature of substrates,can also heat up A and B two components to the temperatur e of 30℃ separately
before using,then mix them.

3.Not curing completely(within 6 hours), don’t force

Storage:
The storage period is 6 months under the condition of room temperature,dry and seal.

Packaging specification:
Two-component,350g/set: A component : 233g, B component : 117g,12 sets/carton.

Product packaging photo of BD916 abrasion resistant rubber repair epoxy putty two parts liquid compound:

------分隔线----------------------------